Bathtub is separating from the wall
A gap opening between the tub and the wall is almost always a failed caulk joint, and a new bead closes it. Press the caulk and then step into the empty tub and watch the gap. If the gap stays the same width, the joint gets cut out, cleaned and re-sealed, and the wall and tub stay where they are. If the gap opens as you stand in it, the tub is not supported properly underneath, and it gets shimmed and re-secured before any new caulk goes on, because caulk on a tub that moves splits again within months.
Read the full guideShower runs constantly and the handle won't shut the water off
A shower that runs constantly while the handle spins loose has a worn-out cartridge inside the valve, and that cartridge is a part, not a new shower. Shut the water off at the shutoff for that bathroom, or at the main, because a valve in this state does not stop on its own. A plumber replaces the cartridge, trim and handle in about 2 hours when the brand is known. The valve body behind the wall only comes out when no cartridge matches an unknown brand, when the body is corroded, or when the valve has stuck and leaked for 10 years or more.
Read the full guide
Ready to hire? Find your city to see what bathroom and shower repairs cost there and how Runhome calls local contractors for you.
