Short answer
Breakers that trip over and over on an old panel point at the panel itself, not at your appliances. A panel that feels hot, buzzes, crackles, or smells scorched is a hazard, so stop resetting tripped breakers and get an electrician the same day. Panels that are known to fail to trip, like a Federal Pacific Stab-Lok, get replaced rather than repaired, and the rest of the house wiring stays.
Tell a nuisance trip from a failing panel
- Turn off the appliances on the tripping circuit and reset the breaker once.
- Rest a hand on the panel cover, never on the breakers, and feel for heat with the house drawing normal power.
- Listen and smell at the panel. Buzzing, crackling, or a burnt smell means stop and call an electrician.
- Read the panel label inside the door for the make and the main breaker size.
- Note whether the same breaker trips every time, or different breakers trip in different rooms.
If one breaker trips only when you overload it and the panel stays cool, an electrician can fix that circuit. If breakers trip across the house, or the panel is hot, buzzing, or scorched, stop here and hire an electrician. Do not keep resetting a hot panel.
Repair or replace
| Situation | What to do |
|---|---|
| One breaker trips under a heavy load, panel cool | Repair. An electrician moves the load to its own circuit or replaces the worn breaker. |
| Breakers trip across the house, panel cool | Check the total load against the panel rating. A larger panel or added circuits fixes it. |
| Panel warm to the touch, buzzing, or scorched | Replace. Hire an electrician now and leave the panel alone until it is checked. |
| Panel is a Federal Pacific Stab-Lok, Zinsco or Pushmatic | Replace. These panels are known to fail to trip and are treated as a hazard. |
| Breaker will not reset, or shows burn marks | Replace the breaker and check the panel. Hire for this. |
| Lights dim or flicker when appliances start | Check the main lugs and the neutral. Hire for this. |
What it costs
Runhome contractor estimates for replacing the panel and correcting the wiring ran from $1,775 to $3,750 as of November 2026, including the trip and assessment.
| Option | Range |
|---|---|
| Replace the panel and correct the wiring, parts and labour | $1,775 to $3,750 |
Can I do it myself?
No. Work inside a panel is dangerous even with the main breaker off, because the main lugs and the service wires stay live. You can reset a breaker once, keep the panel door closed, and write down the make, the age and which breakers trip. Everything past that is an electrician's job. If the panel is hot, buzzing, or smells burnt, leave the area and call one today.
What a contractor will ask you
Have these ready and you skip the back-and-forth.
- The panel make and main breaker size. Both are on the label inside the door.
- The age of the panel, or when the service was last upgraded.
- Which breakers trip, and what is running when they do.
- Whether the panel feels warm, buzzes, or smells burnt.
- A photo of the open panel that shows the breakers and the label.
Common questions
- My breaker keeps tripping but the appliance seems fine.
A breaker that trips on a normal load is either worn out or sitting on a circuit that is overloaded. An electrician tests the circuit and the breaker. If the same breaker trips with different appliances plugged in, the breaker or the wiring is the problem, not the appliance.
- Is an old electrical panel a fire hazard?
A panel that trips properly is doing its job, even when it is old. A panel that buzzes, runs hot, or fails to trip is the hazard. Federal Pacific Stab-Lok and Zinsco panels are known to fail to trip and get replaced.
- Why does my panel feel warm?
A panel runs warm when the connections or the breakers are carrying more than they should. Warmth right at the breaker you are using is normal. Warmth across the whole cover, or a cover that is hot to the touch, means loose connections or a failing panel, so call an electrician.
- The breaker trips and will not reset.
A breaker that will not reset has failed, or the fault is still on the circuit. Push it fully off before you push it back on. If it will not hold, leave it off and call an electrician.
- How much does it cost to replace an electrical panel?
Runhome contractor estimates for replacing the panel and correcting the wiring ran from $1,775 to $3,750 as of November 2026. The final price depends on the panel you choose and how much of the branch wiring needs work.
