Short answer
Damaged baseboard molding is a trim job, and the wall behind it decides how big the job is. Press the molding and the wall just above it. Dry and solid means a carpenter cuts out the damaged run and scarfs in a matching piece. Soft, stained or crumbling means water reached the wall, and that gets fixed before any new molding goes on.
Tell a damaged molding from a water problem in two minutes
- Press the damaged molding with your thumb. Wood that crumbles or sinks in has taken on water.
- Press the wall directly above the molding. Soft drywall, bubbling paint or a brown stain means the water started higher up.
- Look at the floor at the base of the wall for staining, cupping or a damp smell.
- Check the nearest water source on that wall, such as a sink, a toilet, a tub, an exterior door or a window.
- Measure the damaged run and note whether it ends at an inside corner, an outside corner or a door casing.
- Photograph the molding profile straight on and the damaged area in context.
If the molding and the wall behind it are dry and solid, the fix is new molding. If the wall or the floor is soft, stained or damp, fix the water first, or the new molding fails.
Repair or replace
| Situation | What to do |
|---|---|
| One short damaged run on a dry, solid wall | Repair. Cut back to the nearest joint and scarf in a matching length. |
| Damage runs through a corner or most of a wall | Repair. Replace the full run between corners so the joints land clean. |
| The profile is discontinued or unknown | Repair. Match the height and depth as closely as you can, or replace every run in the room so they match. |
| The wall or floor behind the molding is soft, stained or damp | Fix the water source and the damaged drywall first, then replace the molding. |
| The molding is cracked, split or crushed and the wall is fine | Replace the damaged piece. |
What it costs
Runhome contractor estimates for replacing damaged 5¼ inch decorative baseboard molding ran from $244 to $575 as of November 2026, including the trip and assessment.
| Option | Range |
|---|---|
| Replace about 3 ft of 5¼ inch decorative baseboard, including one corner | $244 to $545 |
| Replace about 5 ft of 5¼ inch decorative baseboard, including one corner | $278 to $575 |
Can I do it myself?
Yes, if you can match the profile and cope an inside corner. Cut the damaged run out with a multi-tool, pry the old piece off the wall, and nail the new length into the studs with 2-inch finish nails or brads. Hire a carpenter when the profile is discontinued and the new piece has to be built up from stock molding, when the damage runs through several corners, or when the wall behind it is soft. Hire a painter if you want the repair blended, because colour-matching old trim paint is the part most homeowners get wrong.
What a contractor will ask you
Have these ready and you skip the back-and-forth.
- A wide photo of the damaged molding and the whole wall around it.
- Whether the damaged run is straight or includes an inside or outside corner.
- The height and profile of the molding, for example 5¼ inch with a decorative curve.
- Whether the molding is painted or stained, and its colour.
- Whether the damaged section is one continuous wall or split across rooms.
- The length of molding to replace, in feet.
- The age of the home or the room.
Common questions
- Can I replace just the damaged piece of baseboard?
Yes, when the damage is one short run on a dry wall. A carpenter cuts the bad section out back to the nearest joint and scarfs in a matching length, then caulks and paints the seam.
- How do I match baseboard molding that is no longer sold?
Take a short offcut to a lumber yard and match the height, depth and profile as closely as you can. When nothing comes close, replace every run in the room so the new molding matches itself, which often costs less than a custom knife.
- What causes baseboard molding to get damaged?
The usual causes are water from a nearby leak, a door or furniture banging into it, and pets chewing or clawing it. Water damage is the one to catch early, because the wall behind the molding is usually damaged too.
- Do I have to paint the whole wall after replacing baseboard?
No. A painter fills the nail holes, caulks the top edge and touches in the molding and the paint line where it meets the wall. Blending is only hard when the wall paint has faded, because new paint on an old wall shows as a patch.
- How much does it cost to replace 3 feet of baseboard?
Runhome contractor estimates for replacing about 3 feet of 5¼ inch decorative baseboard, including one corner, ran from $244 to $545 as of November 2026. The trip and assessment are included.
