Skip to content
Homeowner at a kitchen table reviewing a printed repair estimate

Plumbing

Is your contractor quote fair? Fees you can question and how to negotiate

A fair contractor quote is written, itemized, and close to other bids. Question vague fees and unexplained markups, and put every change in writing.

By Josh Arneson, Handyman and Property ManagerPublished

How do you know if a contractor quote is fair?

A fair quote is in writing, lists the work and materials, and lands close to the other bids you collect. If one number sits far from the rest, ask why before you decide anything.

The Federal Trade Commission says a written estimate should describe the work, the materials, the completion date, and the price. It adds that most legitimate bids fall into a fairly close range (Hiring a Contractor, via Texas Law Help).

When you read a plumbing estimate or any other repair quote, look for these things:

  • The labor rate or the flat price, and what it includes
  • Materials listed by item, not rolled into one lump sum
  • Whether permits are included
  • A start date and a finish date
  • Who handles cleanup and trash hauling

A quote that says only "repair plumbing, $1,900" gives you nothing to compare. Ask for the breakdown. A good contractor will not mind.

Which contractor fees can you question?

You can question any fee that the quote or contract does not explain. Common examples are change order fees, overhead or markup lines, permit and disposal charges, and a lien fee. Some are legitimate. All of them should be written down before work starts.

Change orders cause the most trouble. A change order is a written approval for work that differs from the original contract, and it can change both cost and schedule. The FTC advises that your contract spell out how change orders are handled (Texas Law Help). If a contractor adds a charge later and you never signed a change order, you have good reason to push back.

Here is how to sort the fees you may see:

  • Permits: Usually fair, but they should appear on the quote. The contract should say who pulls them.
  • Disposal and cleanup: Fair when listed. Ask for a "broom clause" that makes the contractor responsible for cleanup.
  • Overhead and markup: Common, but ask what percentage and what it covers.
  • Change order fees: Fair only if you approved the change in writing first.
  • Late fees and "administrative" fees: Question these if they are not in the signed contract.

Georgia's Attorney General also suggests limiting a down payment to no more than 25% of the contract price and holding back 10% until the work is done to your satisfaction (Georgia Consumer Protection Division). Rules differ by state, so check your own.

Is a $180 travel fee normal?

It can be, but ask what it covers. Many contractors charge a trip or diagnostic fee, and the amount varies by trade and by hour of the day. Runhome's AC repair cost guide reports that most HVAC companies charge a diagnostic fee of $75 to $250, based on This Old House and Fixr. Many credit it toward the repair if you hire them.

A $180 charge sits inside that range. Whether it is fair depends on three questions:

  1. Does it include the diagnosis, or is it only for driving to your home?
  2. Will the company credit it if you approve the repair?
  3. Was the fee stated before the visit?

If nobody told you about it until the invoice arrived, say so politely and ask for a revised bill. After-hours calls cost more, so check the time of the visit too.

How do you negotiate a contractor quote?

Start with the numbers, not the contractor. Collect two or three written bids for the same scope of work, then ask for an itemized breakdown so you can compare line by line. Negotiating works best when you are specific.

Try these steps:

  1. Ask the contractor to itemize labor, materials, permits, and fees.
  2. Point to the scope, payment schedule, and change order terms that differ between bids.
  3. Ask whether a different material or a flexible start date lowers the price.
  4. Offer to handle a small, safe piece yourself, such as clearing the work area.
  5. Say your budget plainly and ask what the contractor can do within it.

Keep the tone friendly. You want a fair price and a contractor who still wants your job. Do not ask a company to cut corners on safety, permits, or licensed work. For electrical and gas work in particular, a lower price is not worth a skipped inspection.

Should you get more than one quote?

Yes, for any repair that costs more than a small service call. The FTC advises getting multiple estimates and warns against automatically choosing the lowest bidder. A price far below the rest may mean fewer tasks, weaker materials, or less experienced labor (Texas Law Help).

For HVAC, plumbing, and electrical repairs, two or three bids are usually enough. Give each contractor the same description and the same photos so you compare equal scopes. Runhome's guide on what to send for an accurate contractor quote shows how to do this for an electrical panel, and the same approach works for other jobs.

Also read the contract before you sign. If you sign at home with a contractor who came to you, Georgia's guidance says you generally have three days to cancel a home improvement contract over $25, with an exception for emergency repairs (Georgia Consumer Protection Division). Never sign a contract with blank spaces.

Common questions

Can a contractor charge more than the quote?

Only if the contract allows it or you approve a change in writing. Ask for the change order before the extra work starts.

What should a written estimate include?

The work to be done, the materials, the completion date, and the price. Ask for the license number and the payment schedule too.

Is it rude to ask a contractor to explain a fee?

No. A professional expects the question, and a clear answer is a good sign.

How do I compare two quotes that look different?

Ask both contractors to itemize the same scope. Then compare labor, materials, permits, and fees line by line.

Get a second set of eyes before you decide

If a quote still feels off, Runhome can help you understand what is going on. Start a Runhome diagnosis chat to describe the issue, upload photos, and get project guidance. You can also read our fix guides or contact us with questions. Runhome is featured in this article.

What's the oldest thing on your list?

Stop taking calls from aggressive sales reps. Hand off your next repair and let Runhome manage the rest.