Runhome prices and arranges window repairs, so its own estimates appear throughout this guide. Each estimate includes the trip and the assessment. Your price depends on the part that failed, the size of the window, and how high off the ground it sits.
What window repair costs by problem
Window repair prices follow the part that failed, not the window as a whole. Screens and balances are the cheapest fixes. Glass and sealed units cost the most. These are Runhome's contractor estimates for each job.
- Torn or bent screen, new frame and mesh: $140 to $360, from Runhome's window screen guide.
- Sash that drops and won't stay up, new pivot shoe and balance: $195 to $495, from Runhome's sash guide.
- Broken or fogged glass in a sound frame, new insulated unit: $340 to $780, from Runhome's broken glass guide.
- Bay window that leaks in the rain, exterior flashing or sealant repair: $355 to $790, from Runhome's bay window guide.
- Whole window replacement, unit plus labor: $475 to $1,200, from the same sash guide.
Runhome's repair price index shows a typical range of $250 to $550 for lighter window repairs, such as a stuck sash, a broken pivot shoe, a torn screen, or a missing handle. That range comes from 42 estimates given between April 3 and November 15, 2026, and the median was $400. For a national comparison, This Old House puts window repair at $100 to $600, with an average of $392.
Why does glass cost more than other window fixes?
A sealed double-pane window is one manufactured part. Two sheets of glass sit around a spacer, and the whole unit is measured, ordered, and swapped, even when only the outer sheet is cracked. That is why glass repair runs a few hundred dollars and takes about a week for the new unit to arrive.
A single sheet of glass in an older sash is the exception. A glazier can cut and glaze it on site in one visit, and it costs less than a sealed unit.
Fog between the panes means the edge seal has failed. This Old House notes that fogging is often cosmetic at first, and that defogging is a short-term fix because it does not restore the seal or the insulating gas. The lasting fixes are a new sealed glass unit or a new sash.
To tell which price applies, look at the broken edge from the side. Two sheets with a thin spacer and a small gap between them means a sealed double-pane unit. Tell the contractor which sheet broke, the outer, the inner, or both.
How do you decide between repairing and replacing a window?
Repair the window when the frame is firm and square, the sash still slides and locks, and the problem is one part, such as glass, a balance, or a screen. Replace it when the frame itself has failed. New glass in a frame that has moved breaks again.
Replace the window when:
- The frame is cracked, rotted, or twisted.
- The sash no longer closes or locks after the damage.
- The sash has dropped and the glass is also cracked or fogged, because a new sash covers both.
- The window is 20 or more years old and the balance part is no longer made.
Replacement is the bigger bill, at $475 to $1,200 per window in Runhome's estimates. If your old windows are single pane or clear double pane, the U.S. Department of Energy's window guide says ENERGY STAR qualified windows can save 7 to 15 percent on annual household energy bills, roughly $71 to $501 a year depending on where you live. That can tip a close call toward replacement.
What changes the price of a window repair?
- How many windows you fix at once. The trip charge is most of the cost of a single screen. Walk the house, count every damaged screen or window, and get one quote for all of them.
- The kind of glass. Sealed units are built to order at the size of your sash. Tempered glass in doors, low windows, and shower walls is ordered to size too, so allow about a week.
- How high the window is. Work above the first floor happens from a ladder with glass in both hands. That adds cost, and it is a job to hire out.
- Hidden damage. Soft wood, stains, or a spongy wall mean water has been getting in. The water source gets fixed first, and the wall is opened and dried before anything is sealed.
Can you fix a window yourself?
Some jobs, yes. A ground-floor screen takes a hardware store visit and about an hour. A dropped sash on a ground-floor vinyl window is often a balance swap from inside the room.
Glass is different. A wrong measurement on a sealed unit costs you the whole part, and broken edges cut through gloves. Hire out glass, any window above the first floor, and any sash that is already jammed in the track.
Common questions
How much does it cost to replace a window pane?
A single sheet of glass is cut and glazed on site, which costs less than a sealed unit. For a double-pane window, Runhome's estimate is $340 to $780 to put a new insulated glass unit in the existing frame.
Do I have to replace the whole window if the glass breaks?
No, not when the frame is sound. Glass and insulated units are parts, and a glazier can change them in the frame you already have.
Is it safe to leave a broken window for a few days?
Tape both faces of the glass, then cover the opening with plywood or rigid board if you can reach it from outside. Keep children and pets out of the room until the glass is gone.
Why does one broken pane take a week to fix?
Sealed units are built to order at the size of your sash. Tempered glass is ordered the same way, because it cannot be cut after it is made.
Get a price for your window
Start a Runhome diagnosis chat to describe the problem, upload photos, and get project guidance. Runhome prices the repair for your ZIP code, calls vetted contractors, and sends you one price to approve. Questions first? Contact us.
