Short answer
Floor tiles that crack, sound hollow or lift into a ridge are a bond problem first and a subfloor problem second, so press and tap the floor before you price anything. Tiles that stay solid apart from the crack are usually impact damage, and those tiles get cut out and reset. Tiles that stand up in a ridge, or that sound hollow across a wide area, mean the floor underneath them has moved, and that area gets rebuilt.
Tell a failed bond from a floor that moved, in 10 minutes
- Press the worst spot. Lay a folded towel over a cracked or raised tile and press down hard with your palm. A tile that stays firm is still bonded and only the surface is broken. A tile that rocks, clicks or sinks has come off the bond.
- Tap across the floor with the handle of a screwdriver. A sharp ring is a bonded tile. A dull, hollow knock is a void under the tile.
- Measure the damage. Count how many tiles are cracked, how many move underfoot and how many ring hollow. That count decides the job.
- Look at the joint along the wall. A floor laid tight to the wall with no gap has nowhere to expand, and that is what pushes tiles up into a ridge.
- Check for water. Look along the grout lines for dark or damp staining, and press the floor near the toilet, the tub and the fridge. Water under tile is why a patch fails.
- Look at the slab. On a slab on grade, check whether a crack in the concrete runs along the same line as the tile cracks.
If a couple of tiles are cracked or loose while the rest of the floor rings solid, you are looking at a repair. If tiles stand up in a ridge, or more than a couple of square feet knock hollow, the bond or the slab under that area has failed and the floor comes up.
Repair or replace
| Situation | What to do |
|---|---|
| A few cracked tiles, the rest of the floor rings solid | Repair. Cut out the cracked tiles, scrape the old thinset and reset new ones to match. |
| Tiles knock hollow over a small patch, no ridge | Repair. Lift the hollow tiles, re-bond them and regrout. |
| Tiles stand up in a ridge or push into each other | Replace that section. Tenting means the bond has failed across the area and the floor has moved. |
| Grout joint tight to the wall with no gap | Repair. Cut a gap along the wall and seal it with a flexible sealant. |
| Hollow or tented tiles across a whole room | Replace the floor. The thinset or the slab under it has failed over the whole area. |
| Dark or damp grout, or a wet floor near a fixture | Fix the water first. Repair the leak, then reset or replace the tiles. |
| Tile over a wood subfloor that feels spongy | Replace the subfloor and the tile. Soft wood under tile means the whole floor comes out. |
What it costs
Runhome contractor estimates for repairing cracked or tenting floor tiles ran from $325 to $2,375 as of November 2026, including the trip, assessment and materials.
| Option | Range |
|---|---|
| Repair, resetting cracked or hollow tiles | $325 to $700 |
| Full tile replacement, labour and materials | $1,132 to $2,375 |
Can I do it myself?
You can reset a few cracked tiles yourself when the floor below them is sound and you still have matching tiles. Score the grout around the tile, break the tile out from the centre with a chisel and a hammer, scrape the old thinset off the slab, then set the new tile on fresh thinset and grout it after 24 hours. Budget a day and wear eye protection, because tile shards fly.
Hire a tiler for anything beyond a couple of tiles, for tented or hollow areas, and for any floor over a slab that has cracked. A floor that tented once tents again unless the whole bond is renewed, so patching the ridge alone is money spent twice.
What a contractor will ask you
Have these ready and you skip the back-and-forth.
- How old the tile floor is. Even a rough range changes the verdict.
- Whether the damage is on the floor, on the wall or inside the shower.
- Roughly how big the damaged area is, such as a few tiles or most of the room.
- Whether the tiles are cracked, or actually loose, moving or missing.
- Whether they sound hollow when you tap them next to the solid tiles.
- Whether the cracks have got worse over the last year or stayed the same.
- Whether the floor is over a concrete slab or a wood subfloor over a basement or crawlspace.
- Every sign of moisture near the damage, such as damp grout, a musty smell or dark grout lines.
- Anything that changed just before the tiles lifted, such as a fridge or cabinet moved, a big temperature swing or hammering nearby.
Common questions
- Why did my tiles tent up overnight?
Tiles lift when the bond under them lets go and the floor has nowhere to expand. A floor laid tight to the wall with no gap is the usual reason. A ridge that still feels firm has to come out anyway, because the bond has already failed.
- Can I fix cracked bathroom floor tiles without replacing the floor?
Yes, if the tiles around them ring sharp when you tap them. The cracked tiles get cut out and reset, and the rest of the floor stays. If the floor knocks hollow across a wide area, that repair grows into a floor rebuild.
- Do cracked tiles mean my foundation is failing?
Not on their own. Look at whether the cracks follow a crack in the slab underneath. Add cracks in the walls, doors that stick or a floor that slopes, and the slab needs a structural check.
- How do I tell if a tile is loose or just cracked?
Tap it with a screwdriver handle. A dull, hollow knock means the tile has come off the bond. A sharp ring means it is still bonded, even where the surface is cracked.
- Is it cheaper to patch tiles or replace the whole floor?
Patching a few tiles costs far less than a full replacement. Replace only when the hollow or tented area spreads across the room, because a patch over a failed bond lifts again.
